EIM dispatched L61860 (61860 MA) thin-section, single-row deep groove ball bearings from Luoyang on November 3, 2026, for transfer to the Port of Shanghai. The Dutch customer had requested P6 accuracy and separate checks on clearance.
Checking stock against the customer’s drawing
The customer sent drawings on October 26. EIM reviewed the available stock against those drawings on October 29 and inspected the bearings on October 31. The order identified axial runout and additional face and radial geometry requirements. The photographs show an inspector positioning a dial gauge inside the ring.

Why the clearance record matters
Internal clearance describes the movement available between the rings. Fit clearance concerns the interface between a ring and its mating part. The inspection team recorded the clearance items separately against the agreed limits. Keeping them separate lets the recipient compare each entry with the corresponding drawing requirement.

Dispatch from Luoyang
After inspection and packing, the bearings left Luoyang for the domestic leg of the journey. The freight plan called for LCL loading at Shanghai on November 15. The latest confirmed movement in the order record is the November 3 dispatch.
When requesting a quote for a thin-section replacement, include the full designation, the required accuracy class and the drawing limits for internal clearance and mounting fits.
Need to verify a bearing for your equipment?
Send the complete model designation or drawing, load conditions, speed, quantity and other critical requirements.




