EIM Bearing’s project notes record a shipment of 10 sets of L313823 four-row cylindrical roller bearings for a German customer. The specification called for P6 precision, C4 radial internal clearance and controlled hardness for heavy-duty rolling mill applications. The notes report ocean-freight departure from Qingdao Port on November 10, 2026, for Bremerhaven, Germany.

Drawing Review and Order Confirmation
The German customer sent drawings and requested a quotation on September 29, 2026. EIM reviewed the proposed dimensional, clearance and hardness requirements on October 4 before the parties finalized the order and production schedule.
Dimensional, Clearance and Hardness Checks
The supplied production narrative states that a pre-dispatch inspection took place on October 21. The original dimensional summary lists the following nominal measurements and deviation ranges:
| Inspection item | Nominal value | Deviation stated in source |
|---|---|---|
| Bore diameter (d) | 260 mm | 0–25 μm |
| Outside diameter (D) | 292 mm | 0–30 μm |
| Overall width (B) | 220 mm | 0–500 μm (also written −0.50 mm) |
| Radial clearance | C4 | Customer-specified acceptance |
The source summary does not consistently state the plus/minus direction of the micrometre-level deviations. These figures should therefore be read as project notes, not a standalone tolerance specification. The approved drawing and agreed inspection report control final acceptance.

Hardness Requirements
| Component or check | Specified hardness |
|---|---|
| Inner and outer rings | 58–64 HRC |
| Rollers | 60–65 HRC |
| Variation across measuring points on the same component | ≤ 2 HRC |
The project specification called for P6 dimensional precision and C4 radial internal clearance. The actual selection and verification of those requirements should be evaluated against the specific bearing drawing, fitting conditions and operating temperatures; C4 is not universally suitable for every rolling mill.
Packing and Ocean-Freight Dispatch
The batch left EIM’s Dalian production facility on October 22 after the factory packing and inspection stages described in the project record. The same record states that customs clearance and vessel loading were completed at Qingdao Port on November 10 and the vessel then departed for Bremerhaven. Final delivery and installation in Germany are not documented in the supplied material.
Request L313823 or Other Custom Four-Row Bearings
When enquiring, send the model and suffixes, approved drawings, roll-neck and housing fits, required precision class, radial clearance, material and hardness criteria, quantity and destination. Review EIM cylindrical roller bearing products for related series.
Need to verify a bearing for your equipment?
Send the complete model designation or drawing, load conditions, speed, quantity and other critical requirements.



